Darcy’s Law: the basic equation describing how fluid, such as groundwater, flows through a porous material like soil or rock. It was developed by French engineer Henry Darcy in 1856 from experiments on sand filters.
Darcy’s Law Formula
Q = −K × A × (dh/dl)
- Q = flow rate (volume per time)
- K = hydraulic conductivity
- A = cross-sectional area of flow
- dh/dl = hydraulic gradient, the change in hydraulic head over distance
The minus sign shows that water flows toward lower head.
Groundwater Velocity
Darcy’s law gives flow per unit area (specific discharge, q = Q ÷ A). The actual speed of groundwater through the pores is faster: v = q ÷ ne, where ne is the effective porosity.
Example: in sand with K = 10 ft/day, a gradient of 0.01 and effective porosity of 0.25, groundwater moves about 0.4 ft/day, roughly 146 feet per year.
Uses
- Estimating how fast a contamination plume travels
- Sizing dewatering systems for excavations
- Estimating well yields and aquifer flow
- Seepage under dams and levees
Limits
Darcy’s law applies to slow, laminar flow. It breaks down for very fast flow in coarse gravel, karst or wide fractures.
Frequently Asked Questions
What does Darcy’s law calculate?
The rate of groundwater flow through soil or rock.
Why is groundwater velocity faster than Darcy flux?
Because water moves only through the open pores, not the whole cross-section.
Related Terms
- Hydraulic Conductivity (K)
- Hydraulic Head
- Permeability
- Porosity (n)
- Transmissivity
- Hydro-Geology (Hydrogeology)
Questions about groundwater flow at a site? Call (888) 930-6604 to talk with a Geo Forward geologist.
Sources
- U.S. Geological Survey: Basic Ground-Water Hydrology (Water-Supply Paper 2220)
- U.S. Geological Survey: Water Science Glossary
Technical Review
Reviewed by Adam Azad Kaligi, PG
Founder and Licensed Professional Geologist, Geo Forward, Inc.
Last updated: November 2026

