Contact Metamorphism – Metamorphism is associated with the intrusion of an igneous mass. Metamorphic changes are caused principally by heat, but also by magma composition and deformation related to the intrusion. Pressures are relatively low (<3000 bars) while temperatures range from 200°C to 1000°C.
Liquid Limit (LL) “Liquid Limit (LL)” in the field of geological engineering, refers to the upper limit of the “plastic state.” This is a separation of the plastic phase and viscous liquid phase when measuring soil consistency. Mathematically, it is the water content (basing on the percent of dry weight), at which two sections of…
Zeolites Definition In geology, zeolites are a group of hydro-alumino-silicate minerals that are compositionally analogous to the feldspars. Zeolites typically comprise sodium (Na), calcium (Ca), or potassium (K) as chief metals. And zeolites also tend to develop within basalt cavities, lake sediments, oceanic sediments, and volcanic tuff. Modern Economical uses of the Zeolites Modernly, zeolites…
What is a Concrete Slab and Buttress Dam? A Concrete Slab and Buttress Dam is a freshwater-retaining structure comprising reinforced concrete slabs that are supported in-place by buttresses. The foundation of a Concrete Slab and Buttress Dam receives a large load. Thus, the foundation must be structurally sound, impervious, and competent. The alternative types of dams…
Water Table Water Table: In the hydrogeology branch of geology, the water table represents the surface of an unconfined groundwater aquifer, where the hydraulic pressure is equal to atmospheric pressure. Additionally, a water table is present in a perched groundwater zone. Although, there is no water table in a confined aquifer.
De-Watering System in Methane Mitigation De-Watering: In accordance with the Los Angeles Department of Building and Safety (LADBS) Methane Code, Ordinance Number 175790, a de-watering system is a permanent water removal system in a methane mitigation system. In the mitigation process, a de-watering system consists of perforated horizontal pipes, gravel pockets, sump areas with pumps,…
Potentiometric Surface The term “Potentiometric Surface” means the hydrogeological surface that represents the total hydraulic head of groundwater from a confined aquifer or semi-confined aquifer that’s under pressure. The Potentiometric Surface of an aquifer is defined by the level to which water will rise in a groundwater monitoring well (that’s exclusively screened within said aquifer).
