Polychlorinated Biphenyl (PCBs)

Polychlorinated Biphenyl (PCBs)

Polychlorinated Biphenyl (PCBs): Polychlorinated Biphenyl (PCBs) are highly toxic human-engineered chlorinated hydrocarbons that have been used around the world as enhancers to hydraulic oil and electrical insulators. PCBs were applied for maintaining low flammability rates, high boiling points, and stronger chemical stability. As of 1979, PCBs have been banned from use in the United States and many other nations due to carcinogenicity, high rates of pollution and contamination through environmental systems and animals, and its long-lasting degrading timeframes once introduced into the environment. Polychlorinated biphenyls, mostly comprise carbon, hydrogen, and chlorine atoms, and are commonly found within hydraulic fluid systems, electrical transformers, capacitors, coolants, and plasticizers. Additionally, PCBs can exist in carbon-less copy-papers, as well as plastic and rubber products.

PCB Pollution

PCBs are negatively impacting the planet in the forms of soil contamination, groundwater and stormwater pollution, as well as oceanic, lake body, and river system pollution. The substance is highly stable and highly mobile. Thus, it becomes a long-lasting contaminant that transports into various ecological systems after being released at a commercial or industrial site. As a result of polychlorinated biphenyl pollution, animal wildlife and human populations are experiencing health effects such as cancer, birthing defects, reproductive organ failure, comprised immune systems, and central and overall nervous system impacts.

PCBs Soil & Groundwater Contamination

As part of the Phase 1 Environmental Site Assessment process, the environmental professional can identify underground hydraulic lifts and hydraulic oil tanks. And per the ASTM E1527 standard, the mere possibility of hydraulic oil leaking from each hoist constitutes a “recognized environmental condition.”  As a result, a Phase 2 Environmental Site Assessment is likely to occur, to directly sample the subsurface for soil contamination, using Environmental Protection Agency (EPA) Laboratory Analysis Method 8082. This method aims to identify the full range of polychlorinated biphenyls, from PCB-1016 through PCB-1260. Lastly, a professional geologist studies each detection of  PCBs along with the applicable screening level for that region. If soil and groundwater contamination is present, a remedial action plan is then prepared to remove the hydraulic lifts and clean up the PCBs soil contamination issue.

Full Range of Polychlorinated Biphenyls

  • PCB-1016
  • PCB-1221
  • PCB-1232
  • PCB-1242
  • PCB-1248
  • PCB-1254
  • PCB-1260

Similar Posts

  • Plat Map Definition

    ByGeo Forward

    Plat Map Definition Plat Map: A plat map provides the metes and bounds of a parcel in a large tract (to scale), as well as the legal land-use rights and limitations. Additionally, it demonstrates locations of streets and public utility easements, as well as ingress and egress easements. And sometimes plat maps provide information about…

  • Effective Size (D10)

    ByGeo Forward

    Effective Size (D10) “Effective Size” (D10) is an engineering geology term. Effective Size represents a diameter that directly corresponds to the percentage, by weight, of grains that equal to 10% on the grain-size diagram. To illustrate, 10% of the soil sample particles are finer-grained, and 90% of the sample particles are coarser than the “effective…

  • Consolidation

    ByGeo Forward

    Consolidation “Consolidation” in geology refers to the gradual or slow reduction in the volume of a soil sample (representing a larger soil mass), and the increase in density in response to an applied increasing load, or compressive stress.

  • Porosity (n)

    ByGeo Forward

    Porosity (n) “Porosity” (n), in the geological engineering field, is a percentage value that represents the bulk volume of a rock or soil, that is occupied by the void space within. Porosity (n) Formula Porosity (n) = [(Volume of Voids ÷ Total Volume) x 100%]

  • Liquid Limit (LL)

    ByGeo Forward

    Liquid Limit (LL) “Liquid Limit (LL)” in the field of geological engineering, refers to the upper limit of the “plastic state.” This is a separation of the plastic phase and viscous liquid phase when measuring soil consistency. Mathematically, it is the water content (basing on the percent of dry weight), at which two sections of…

  • Concrete Gravity Dam

    ByGeo Forward

    What is a Concrete Gravity Dam? A Concrete Gravity Dam is also known as “Gravity Arch Dam,” and is a freshwater-retaining concrete structure that has a wider footing (base) than the top-section. The purpose of a Concrete Gravity Dam is to maintain a low center of gravity, in order to avoid collapsing in the event…