Vent Riser in Methane Mitigation Vent Riser in Methane Mitigation: As per the Los Angeles Department of Building and Safety (LADBS) Methane Code, Ordinance Number 175790, a vent riser is a cast iron or ABS pipe that runs through the building walls (vertically). A vent riser is part of a methane mitigation system and has…

Dry Strength “Dry Strength” is a value that represents the strength of a soil sample, when dry, as determined by the crushing test. There is a common geotechnical engineering laboratory procedure for determining the cohesiveness or plasticity of a sample with organic or inorganic clays and silts.  

Rotational Slide (Slump) Definition Rotational Slide (Slump):  A rotational slide is a type of landslide movement that occurs in a turning moment, about a pivot point that is above the center of gravity. This is typically due to an increased normal force on a slope, as well as a reduced cohesion factor of the soil…

Hydro-Compaction Definition (Hydrocompaction) The term “Hydro-Compaction” or “Hydrocompaction” in engineering geology refers to the process whereby soils collapse upon saturation. Hydrocompaction can also be called “Hydro-Consolidation.”

Trench Dam Trench Dam: Per the Los Angeles Department of Building and Safety (LADBS) Methane Code, Ordinance Number 175790, a trench dam is part of a methane mitigation system. A trench dam is essentially a subsurface barrier that exists within a furrow or ditch, that is adjacent to the foundation of a building in a…

Dry Density (ρd) “Dry Density” (ρd) is a value that represents the density of soil when it is completely dry. To illustrate, it equates to (“bulk density” / 1) + “water content.” This is a common geotechnical engineering laboratory procedure. Dry Density Formula Dry Density = [(Bulk Density ÷ 1) + (Water Content)]