Degree of Saturation (SR)

Degree of Saturation (SR)

“Degree of Saturation” (SR) is an engineering geology term and refers to the ratio of the volume of water to the total volume of void space. The Degree of Saturation or SR-value ranges from 0% to 100% (0% being completely dry, and 100% being fully saturated).

Degree of Saturation Formula

Degree of Saturation (SR) = [(Volume of Water) รท (Total Volume of Void Space)]

Similar Posts

  • Gravel Blanket

    Gravel Blanket in Methane Mitigation A gravel blanket is a 2-inch or 4-inch thick layer of gravel, sand, or approved material that transmits methane soil gas to the horizontal sub-slab perforated pipes and verticle vent riser of a passive methane mitigation system.

  • Transgression

    Transgression Transgression: In geology, the term transgression is the formation of a specific sequence of sedimentary and metamorphic layers, that are the result of ocean water advancing onto land. To illustrate, when transgression occurs over millions of years, geologists find a layer of sand, overlain by shale, and overlain again by limestone. The opposite of…

  • Petrogenic Gas

    Petrogenic Gas Petrogenic Gas: In geology, petrogenic gas refers to natural gas that is the byproduct of the thermal decomposition of biological and organic matter. In fact, this is the same process that results in the geological formation of petroleum underground. For instance, methane soil gas hazards in Los Angeles Methane Zones are typically resulting…

  • Water Table

    Water Table Water Table: In the hydrogeology branch of geology, the water table represents the surface of an unconfined groundwater aquifer, where the hydraulic pressure is equal to atmospheric pressure. Additionally, a water table is present in a perched groundwater zone. Although, there is no water table in a confined aquifer.