ARB Twin Compressor Install Jeep JK Wrangler – Under Passenger Seat For those inquiring about an ARB twin compressor install on a Jeep JK, Geo Forward recommends mounting the unit under the passenger seat. This option provides jeep owners with ample spacing, easy installation, and reduces exposure to the elements. For additional remarks, or to…
Wing Dam or Wing Dike A “Wing Dam” or “Wing Dike” refers to a dam that intentionally retains a fraction of the width of a flowing water source. Unlike a conventional dam, a wind dam aims to divert the path of water flow. Additionally, a wing dike can control the velocity of water flow. For…
Strike-Slip Fault or Transform Fault Strike-Slip Fault (Transform Fault): In the field of geology, a strike-slip fault, or a transform fault, is a fault in which movement is parallel to the strike of the fault plane. The opposite of a strike-slip fault is a dip-slip fault. Left-Lateral or Right-Lateral Strike-Slip Fault A transform fault can…
Oblique-Slip Fault Oblique-Slip Fault: In geology, an oblique-slip fault is a fault that moves parallel to the strike or dip of the fault plane.
Listric Fault Listric Fault: In the field of geology, a listric fault refers to a fault with a curved fault plane. Most listric faults comprise a steeply dipping section near the surface. But the fault plane becomes increasingly flat with depth. Listric faults can be normal faults or reverse faults.
Dip-Slip Fault Dip-Slip Fault: In geology, a dip-slip fault is any fault in which the earth’s movement is parallel with the dip of the fault plane. For example, a normal fault, reverse fault, or listric fault. The opposite of a dip-slip fault is a strike-slip fault.
Normal Fault Normal Fault: In the field of geology, a normal fault is a type of dip-slip fault where the hanging wall moves downwards from the footwall. The average dipping angle of a normal fault ranges from 45 to 90 degrees. Normal faults are the opposite of reverse faults. Detachment Fault Detachment Fault: A detachment…
Reverse Fault Reverse Fault: In the field of geology, a reverse fault is a dip-slip fault in which the hanging wall moves upwards, relative to the footwall. The average dipping angle of a reverse fault ranges from 45 to 90 degrees. However, if less than 45 degrees, it becomes a “thrust fault.” Reverse faults are…
Thrust Fault Thrust Fault: In the field of geology, a thrust fault is a reverse fault in which the fault plane dipping angle is less than 45 degrees. Thrust faults are dip-slip faults, and can also be listric faults. For instance, the fault underlying the western embankment of the historical St. Francis Dam in Saugus,…
What is a Concrete Slab and Buttress Dam? A Concrete Slab and Buttress Dam is a freshwater-retaining structure comprising reinforced concrete slabs that are supported in-place by buttresses. The foundation of a Concrete Slab and Buttress Dam receives a large load. Thus, the foundation must be structurally sound, impervious, and competent. The alternative types of dams…
What is a Concrete Arch Dam? A Concrete Arch Dam is a curved freshwater-retaining structure that is concave in the hydro-geologically down-gradient direction, and uniformly thick from the base to top. With Concrete Arch Dams, a major part of the water load value gets distributed to the abutments of the dam. Thus, Concrete Arch Dams…
What is an Embankment Dam? An Embankment Dam is a freshwater-retaining structure comprising excavated rock, soil, or a combination of rock and soil from nearby geological formations. In fact, Embankment Dams are known as an “Earthfill Dam” when filled with soil, and a “Rockfill Dam” when filled with rocks. Earthfill Dams are most common. The…
What is a Concrete Gravity Dam? A Concrete Gravity Dam is also known as “Gravity Arch Dam,” and is a freshwater-retaining concrete structure that has a wider footing (base) than the top-section. The purpose of a Concrete Gravity Dam is to maintain a low center of gravity, in order to avoid collapsing in the event…
Seismic Risk Definition Seismic risk is the probability that a subject site will be adversely affected by any seismic hazard, such as an earthquake. Seismic risk tends to increase in areas that are more earthquake-prone and vulnerable to damage. And vulnerability refers to the potential impact on people, as well as properties. For instance, places…
The St. Francis Dam Disaster The St. Francis Dam disaster of 1928 was the failure of a large concrete gravity dam due to unmitigated geologic hazards, causing over 55 miles of violent flooding, and over 400 deaths. It is said to be California’s worst engineering catastrophe to date. Updated April 11, 2024. Saint Francis Dam…
Monoculture Definition The term “Monoculture,” in the fields of farming and agriculture, refers to a cultivation system that comprises only one organism. For instance, an entire crop field that only grows carrots. In a monoculture, there is no symbiosis between different species. As a result, there isn’t any comingling with other organisms. In fact, for…
Why Sustainable Agriculture and Sustainable Farming is Important What is Sustainable Agriculture or “Sustainable Farming?” Sustainable agriculture is an eco-friendly farming ideology that harmonizes every part of a natural ecosystem in order to upkeep soil fertility and produce an abundance of high-quality foods. Sustainable farming is an alternative concept to traditional farming methods that aims…
